PET STANDARD Replacement Filters for Cat Water Fountain, 12-Pack

Soak one of these cat water fountain filters in water for 2 minutes and rinse it under running water before it goes into the fountain. The PET STANDARD pack holds 12 replacement filters and 12 pre-filter sponges, each one individually packaged and sealed. Every filter is about 4 inches long, 4 inches wide and 0.5 inches thick.

The 12 filters and 12 sponges in the pack

Each of the 12 filters is individually packaged and sealed, and so is each of the 12 pre-filter sponges. The sponges measure 1.5 inches long, 1.1 inches wide and 1 inch high.

Soaking, rinsing and replacing the filters

Soak a filter in water for 2 minutes before first use, then rinse it thoroughly under running water. In summer a filter is replaced every 1 to 2 weeks, and in winter every 2 to 4 weeks. A fountain used by several cats needs a new filter more often than one cat would. The pre-filter sponge is replaced every 4 to 6 weeks.

Cotton, activated carbon and ion exchange resin

Inside every filter there is a three-part filtration arrangement: activated carbon, an ion exchange resin and a cotton layer. That stack sits inside the 4 inch by 4 inch filter body with its 0.5 inch thickness.

Does this filter fit your fountain?

These filters are compatible only with the VEKEN 2.8 L (95 oz) pet water fountain. Check the fountain's model and capacity before buying: a different fountain, or a VEKEN model of another size, is not covered by this compatibility.

How many filters are in one pack?

How many filters and sponges does the pack contain?

There are 12 replacement filters and 12 pre-filter sponges in the pack, all individually packaged and sealed.

How big is each filter?

A filter measures about 4 inches long, 4 inches wide and 0.5 inches thick.

What are the sponge dimensions?

The pre-filter sponges are 1.5 inches long, 1.1 inches wide and 1 inch high.

How often should the filter be changed?

Replace the filter every 1 to 2 weeks in summer and every 2 to 4 weeks in winter, and more frequently when multiple cats use the fountain.

What do I do with a new filter before using it?

Soak it in water for 2 minutes, then rinse it thoroughly under running water.

Which fountain do these filters fit?

They are compatible only with the VEKEN 2.8 L (95 oz) pet water fountain.

• Only compatible with the VEKEN 2.8 L (95 oz) pet water fountain.
• Filter length is about 4 inches.
• Filter width is about 4 inches.
• Filter thickness is about 0.5 inches.
• Pre-filter sponge length is 1.5 inches.
• Pre-filter sponge width is 1.1 inches.
• Pre-filter sponge height is 1 inch.
• The three-stage filtration setup is made up of activated carbon, an ion exchange resin and a cotton layer.
• Before you use it, leave the filter to soak for 2 minutes in water and afterwards give it a full rinse with running water.
• Replace the filter every 1 to 2 weeks in summer and every 2 to 4 weeks in winter.