MRTIOO Gecko Feeding Ledge with Food Cups, 100 cups, 100 Cups+Ledge

Feed small reptiles and other critters above the ground with this reptile food dish: one acrylic ledge plus 100 transparent cups. Traceless sticker hooks hold the ledge to the glass inside the cage instead of suction cups, and the set weighs 50 g (1.8 oz). Each cup is sized to sit on the ledge, and the clear cup lets you see the food from outside the terrarium.

The kit contains one ledge and 100 food cups

Inside the package there is a single reptile feeding ledge and 100 gecko food cups, 102 pieces in total. Bread worms are not part of the set.

• One acrylic feeding ledge with a thread rod, nut and sticker hook
• 100 transparent food cups made to fit that ledge

Putting the ledge on the glass

Installation starts with the protective film: peel off the transparent layer to expose the sticky part. Pick the height you want, wipe the glass or acrylic surface with water or a wet paper towel, let it dry, then press the sticker into place. Slide the ledge onto the thread rod and set the angle, since it can face either side, before screwing the nut down to tighten it. The last step is fitting a cup onto the ledge.

How the acrylic ledge holds and what goes in the cups

The feeder is made of acrylic and the cups of a transparent material, and the manufacturer describes the feeder as durable, eco-friendly and odorless. Sticker screws and hooks carry the ledge rather than suction cups, and once it is installed the ledge stays in place without falling off, shifting back and forth or swaying. It has a strong bearing capacity.

From outside the terrarium you can watch the food through each clear cup. The ledge suits feeding feed and water to small animals, and it gives creatures that avoid the ground another place to eat. Small pets also gain another spot to hang and move around. The cups were upgraded and manufactured to fit this store's feeding ledge.

Which animals the ledge suits, and what to check first

The setup is intended for crested geckos, lizards, frogs, skinks, crickets, cresties, tarantulas, chameleons, iguanas, snakes, hermit crabs, spiders, and a range of other small reptiles and amphibians. It is not a ground-level dish, so it will not suit an animal that only feeds from the floor of the enclosure.

Before buying, check the surface: the sticker hooks need clean glass or acrylic inside the cage, and the ledge should go where the cage door opens if you want to reach it that way. The feeder measures 12.7 x 2.5 x 2.5 cm (5 x 1 x 1 in), and bread worms are not included, so order those separately if you feed them. Replacement sticker screws and hooks are available; search the product code in the store to find them.

Cleaning the feeder and cups

The manufacturer states that the feeder is easy to clean and reuse, and the acrylic and plastic parts can be wiped after feeding. Lift the cup off the ledge to clean it, then set it back on the rod.

Questions about the feeding ledge

How many cups come with the ledge?

The kit includes 100 gecko food cups along with one feeding ledge, for 102 pieces in total.

Does the ledge attach with suction cups?

No, the ledge is held by sticker screws and hooks on the glass inside the cage.

What size is the feeder?

The feeder measures 12.7 x 2.5 x 2.5 cm, or 5 x 1 x 1 in, and weighs 50 g (1.8 oz).

Where does the manufacturer suggest placing it?

The suggestion is the cage door, so food and water can be replaced when the door is open.

How long should I wait before adding food?

The recommendation is 30 minutes after installation.