{"product_id":"kirecoo-stainless-steel-algae-scraper","title":"Kirecoo Stainless Steel Algae Scraper, 25.6\", with 10 blades","description":"\u003cp\u003eKirecoo builds this algae scraper entirely from stainless steel and supplies 10 stainless steel blades with it. With the extension section fitted the handle reaches 25.6 inches; without it the length is 18.1 inches. Kirecoo lists the scraper for use in salt water tanks and in fresh water aquariums.\u003c\/p\u003e\u003ch2\u003eInstalling and disassembling the scraper\u003c\/h2\u003e\u003cp\u003eNo additional tools are needed to put the scraper together. Screw the handle onto the long pole, set the blade between the scraper head and the stainless steel sheet, then tighten the two large screws. Kirecoo advises care when installing the scraper and when switching blades, and the unit can be taken apart again for storage.\u003c\/p\u003e\u003ch2\u003eA right-angle head, water holes and two handle lengths\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe scraper head sits at a right angle to the pole, so the blade meets the tank wall from the side.\u003c\/li\u003e\n\u003cli\u003eHoles in the scraper head let water pass through while you work.\u003c\/li\u003e\n\u003cli\u003eThe pole runs to 25.6 inches with the extension handle installed and measures 18.1 inches without it, so one tool covers two reach lengths.\u003c\/li\u003e\n\u003cli\u003eThe handle, pole, head and blades are all stainless steel, a material Kirecoo describes as resistant to rust.\u003c\/li\u003e\n\u003cli\u003eTen stainless steel blades are supplied with the scraper.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWill it suit your tank?\u003c\/h2\u003e\u003cp\u003eCheck the tank material and the cleaning path before you buy. Kirecoo lists this scraper for salt water tanks and fresh water aquariums, so the water type is not a restriction. Clean with the silicone sealant at the tank corners in mind: Kirecoo warns that the sealant can crack the tank if the blade catches it, so keep the head clear of the corners. The maximum reach is 25.6 inches with the extension fitted, and 18.1 inches is the limit without it; deeper points need the longer setting.\u003c\/p\u003e\u003ch2\u003eQuestions buyers ask before ordering\u003c\/h2\u003e\u003ch3\u003eHow long is the algae scraper?\u003c\/h3\u003e\u003cp\u003eThe scraper measures 25.6 inches at full length with the extension handle installed, and 18.1 inches when the extension is left off.\u003c\/p\u003e\u003ch3\u003eWhat is included with the scraper?\u003c\/h3\u003e\u003cp\u003eThe set includes the scraper and 10 stainless steel blades, which are replaced by unscrewing the two large screws on the head.\u003c\/p\u003e\u003ch3\u003eDoes the scraper work in a salt water tank?\u003c\/h3\u003e\u003cp\u003eKirecoo lists the scraper for salt water tanks and fresh water aquariums.\u003c\/p\u003e\u003ch3\u003eDo I need tools to put it together?\u003c\/h3\u003e\u003cp\u003eNo additional tools are needed: the handle screws onto the pole and the blade is held by two large screws.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eModel: Q-JMK051A\u003c\/li\u003e\n\u003cli\u003eColour: Silver\u003c\/li\u003e\n\u003cli\u003eMade entirely of stainless steel (F1)\u003c\/li\u003e\n\u003cli\u003eResistant to rust (F2)\u003c\/li\u003e\n\u003cli\u003eSuitable for salt water tanks and fresh water aquariums (F3)\u003c\/li\u003e\n\u003cli\u003eStainless steel blades (F4)\u003c\/li\u003e\n\u003cli\u003eMaximum length 25.6 inch with extension handle (F5)\u003c\/li\u003e\n\u003cli\u003eShorter length 18.1 inch without extension handle (F6)\u003c\/li\u003e\n\u003cli\u003eScraper head has holes for water flow (F7)\u003c\/li\u003e\n\u003cli\u003eRight-angle scraper-head design (F8)\u003c\/li\u003e\n\u003cli\u003eWatch the silicone sealant at tank corners (F9)\u003c\/li\u003e\n\u003cli\u003eTake care when installing and switching blades (F10)\u003c\/li\u003e\n\u003cli\u003eNo additional tools needed for installation (F11)\u003c\/li\u003e\n\u003cli\u003eAssembly: screw handle to pole, place blade between head and steel sheet, tighten two large screws (F12)\u003c\/li\u003e\n\u003cli\u003eCan be disassembled for storage (F13)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kirecoo","offers":[{"title":"Default Title","offer_id":44478671290431,"sku":null,"price":28.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/kirecoo-algae-scraper-25-6.jpg?v=1794742555","url":"https:\/\/dogjointly.com\/products\/kirecoo-stainless-steel-algae-scraper","provider":"DogJointly","version":"1.0","type":"link"}