{"title":"HITOP Canada","description":"\u003cp\u003e10+ HITOP products in one collection, priced from 33.71 USD to 53.85 USD.\u003c\/p\u003e\u003cp\u003eProduct types: Aquarium Air Pump, Aquarium Heater, Aquarium Light.\u003c\/p\u003e\u003ch3\u003eHow many HITOP products are in this collection?\u003c\/h3\u003e\u003cp\u003e10+ products.\u003c\/p\u003e\u003ch3\u003eWhat do HITOP products cost here?\u003c\/h3\u003e\u003cp\u003eBetween 33.71 USD and 53.85 USD.\u003c\/p\u003e\u003ch3\u003eWhich HITOP product types are available?\u003c\/h3\u003e\u003cp\u003eAquarium Air Pump, Aquarium Heater, Aquarium Light.\u003c\/p\u003e","products":[{"product_id":"hitop-2-outlet-aquarium-air-pump","title":"HITOP 2-outlet Aquarium Air Pump, 4W 110 GPH, adjustable, with accessories","description":"\u003cp\u003eThe HITOP aquarium air pump ships as a set with two 5 ft air tubes, two air stones, two check valves, two suction cups, a T-connector and a filter cotton pad. Its two outlets and 4 W motor give airflow up to 110 GPH, and the pump is intended for medium to large fish tanks from 20 to 200 gallons. The housing measures 6.3 in x 4.3 in x 4 in.\u003c\/p\u003e\u003ch2\u003eWhat comes in the box\u003c\/h2\u003e\u003cp\u003eThe set covers the parts needed to run two air lines from one pump. Each line has its own tube, air stone and check valve, and the T-connector lets a single line be split further.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo air tubes, each 5 ft long\u003c\/li\u003e\n\u003cli\u003eTwo air stones for diffusing air into the water\u003c\/li\u003e\n\u003cli\u003eTwo check valves to fit on the air lines\u003c\/li\u003e\n\u003cli\u003eTwo suction cups for holding the tubing in place\u003c\/li\u003e\n\u003cli\u003eOne T-connector for splitting an air line\u003c\/li\u003e\n\u003cli\u003eOne filter cotton pad\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePower and airflow\u003c\/h2\u003e\u003cp\u003eThe pump runs on a 4 W motor and delivers airflow up to 110 GPH through its two outlets. A built-in adjustment knob sets the air output, and an on\/off button controls power with one press. The stated noise level is below 35 dB.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHITOP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e4 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAirflow\u003c\/th\u003e\n\u003ctd\u003e110 GPH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNumber of outlets\u003c\/th\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHousing dimensions\u003c\/th\u003e\n\u003ctd\u003e6.3 in x 4.3 in x 4 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNoise level\u003c\/th\u003e\n\u003ctd\u003eBelow 35 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank range\u003c\/th\u003e\n\u003ctd\u003e20 to 200 gallons\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eDoes this air pump suit your tank?\u003c\/h2\u003e\u003cp\u003eCount the air lines you want to run, because the pump has two outlets and the set includes two tubes, two air stones and two check valves. The pump can power bubble diffusers, air curtains and sponge filters, and it can also be used in hydroponic systems.\u003c\/p\u003e\u003ch2\u003eQuestions buyers ask about this air pump\u003c\/h2\u003e\u003ch3\u003eWhat size tank is the pump rated for?\u003c\/h3\u003e\u003cp\u003eIt is intended for medium to large fish tanks from 20 to 200 gallons.\u003c\/p\u003e\u003ch3\u003eHow many air lines can it run?\u003c\/h3\u003e\u003cp\u003eThe pump has two outlets, and the set includes two 5 ft air tubes, two air stones and two check valves.\u003c\/p\u003e\u003ch3\u003eHow much air does it move?\u003c\/h3\u003e\u003cp\u003eAirflow is up to 110 GPH from a 4 W motor.\u003c\/p\u003e\u003ch3\u003eCan the air output be adjusted?\u003c\/h3\u003e\u003cp\u003eYes, a built-in knob adjusts the air output, and an on\/off button controls power with one press.\u003c\/p\u003e\u003ch3\u003eWhat is included with the pump?\u003c\/h3\u003e\u003cp\u003eThe set contains two 5 ft air tubes, two air stones, two check valves, two suction cups, one T-connector and one filter cotton pad.\u003c\/p\u003e\u003ch3\u003eHow loud is the pump?\u003c\/h3\u003e\u003cp\u003eThe stated noise level is below 35 dB.\u003c\/p\u003e\u003ch2\u003eFeatures of the shark-shaped housing\u003c\/h2\u003e\u003cp\u003eThe housing is shaped like a shark and measures 6.3 in x 4.3 in x 4 in. Two outlets sit on the pump, and the adjustment knob is built into the body for setting air output. An on\/off button on the pump gives one-press power control. The pump can run bubble diffusers, air curtains and sponge filters, and it also works in hydroponic systems.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44470687694911,"sku":null,"price":45.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-air-pump-4w-110-gph.jpg?v=1794606163"},{"product_id":"hitop-aquarium-air-pump-6w-160-gph","title":"HITOP Silent Aquarium Air Pump, 6W, 160 GPH, adjustable","description":"\u003cp\u003eThis aquarium air pump from HITOP comes with two air stones, two 4.9 ft air tubes, two check valves, two airflow regulating valves, two suction cups and one T-connector. The pump uses 6W and moves 160 GPH of air, and the manufacturer rates it for tanks holding 50 to 300 gallons. A knob on the unit sets the air volume.\u003c\/p\u003e\n\u003ch2\u003eDoes this air pump suit your tank and setup?\u003c\/h2\u003e\n\n\u003cp\u003eIt can feed a sponge filter, a hydroponic system or a small pond, and the same pump can run several tanks at once. The power cable is 4.9 ft long, which sets how far the pump can sit from the outlet.\u003c\/p\u003e\n\u003ch2\u003eWhat is in the box\u003c\/h2\u003e\n\u003cp\u003eThe pack supplies the pump along with tubing and fittings for two air lines.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 super big air stones\u003c\/li\u003e\n\u003cli\u003e2 air tubes, each 4.9 ft\u003c\/li\u003e\n\u003cli\u003e2 check valves\u003c\/li\u003e\n\u003cli\u003e2 airflow regulating valves\u003c\/li\u003e\n\u003cli\u003e2 suction cups\u003c\/li\u003e\n\u003cli\u003e1 T-connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePower draw and cable length\u003c\/h2\u003e\n\u003cp\u003eThe pump draws 6W and connects by a 4.9 ft power cable.\u003c\/p\u003e\n\u003ch2\u003eShape, light and airflow control\u003c\/h2\u003e\n\u003cp\u003eThe housing is a shark shape with an inner air pump and an outer thickened shell, a double-layer construction.\u003c\/p\u003e\n\u003cp\u003eA switch button turns on the lights built into both sides of the pump.\u003c\/p\u003e\n\u003cp\u003eThe knob adjusts the air volume to the setting you want.\u003c\/p\u003e\n\u003ch2\u003eCommon questions about this aquarium air pump\u003c\/h2\u003e\n\u003ch3\u003eWhat size tank is this air pump for?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer rates it for tanks from 50 to 300 gallons.\u003c\/p\u003e\n\u003ch3\u003eHow many air stones come with the pump?\u003c\/h3\u003e\n\u003cp\u003eTwo super big air stones are included.\u003c\/p\u003e\n\u003ch3\u003eHow long are the air tubes in the box?\u003c\/h3\u003e\n\u003cp\u003eEach of the two air tubes measures 4.9 ft.\u003c\/p\u003e\n\u003ch3\u003eCan the light be turned off?\u003c\/h3\u003e\n\u003cp\u003eA switch button on the pump controls the lights on both sides.\u003c\/p\u003e\n\u003ch3\u003eWhat does the knob do?\u003c\/h3\u003e\n\u003cp\u003eThe knob sets the air volume from the pump.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHITOP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePower\u003c\/th\u003e\n\u003ctd\u003e6W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir volume\u003c\/th\u003e\n\u003ctd\u003e160 GPH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44473780273215,"sku":null,"price":49.91,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-air-pump-6w.jpg?v=1794644545"},{"product_id":"hitop-100w-submersible-aquarium-heater","title":"HITOP Compact Submersible Aquarium Heater, 100 W, digital temperature controller, for saltwater and freshwater","description":"\u003cp\u003eSet the temperature from outside the tank with this 100 W aquarium heater, which uses an external controller and suits both freshwater and saltwater setups. The quartz glass tube measures 0.8 x 0.8 x 9.8 inches, and the heater is made for betta fish tanks, turtle tanks and other small fish tanks from 12 to 30 gallons.\u003c\/p\u003e\u003ch2\u003eWhat the features do in a tank\u003c\/h2\u003e\u003cp\u003eThe external controller is where you set the temperature, and it also carries a heating indicator light that comes on while the heater is working. A digital LED display on the controller shows the current water temperature and the temperature you have set.\u003c\/p\u003e\u003cp\u003eThe heating element sits inside a tube of thickened quartz glass, and the unit is sealed to keep water out. The thermostat range runs from 68 to 93 °F, and the 5.6 ft cable lets the controller sit away from the tank.\u003c\/p\u003e\u003ch2\u003eWhich tanks does it fit?\u003c\/h2\u003e\u003cp\u003eCheck the water volume first: the heater is intended for small fish tanks holding 12 to 30 gallons, including betta fish tanks and turtle tanks. It works in both seawater and freshwater, so a marine setup and a tropical community tank are both within its stated use.\u003c\/p\u003e\u003cp\u003eThe 5.6 ft cable needs a route from the tank to a power outlet.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eQ2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget audience\u003c\/th\u003e\n\u003ctd\u003eFish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e(12-30Gal) 100W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e2 x 2 x 25 cm (0.8 x 0.8 x 9.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific uses\u003c\/th\u003e\n\u003ctd\u003eHeat water in fish tank.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003ePower and controls\u003c\/h2\u003e\u003cp\u003eThe heater draws 100 W, and its temperature is set through the external controller rather than a dial on the glass tube. The adjustment range is 68 to 93 °F, and the LED display reports the real-time water temperature alongside the set point.\u003c\/p\u003e\u003cp\u003eA heating indicator light on the controller shows when the element is active. The cable runs 5.6 ft from the heater to the controller and outlet.\u003c\/p\u003e\u003ch2\u003eWhat comes in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne 100 W heater with external controller\u003c\/li\u003e\n\u003cli\u003eTwo suction cups are included for mounting the heater\u003c\/li\u003e\n\u003cli\u003eA bottom cover for the glass tube\u003c\/li\u003e\n\u003cli\u003eA sticker thermometer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eQuestions buyers ask\u003c\/h2\u003e\u003ch3\u003eWhat size tank is this heater for?\u003c\/h3\u003e\u003cp\u003eIt is intended for small fish tanks from 12 to 30 gallons, including betta fish and turtle tanks.\u003c\/p\u003e\u003ch3\u003eCan it be used in saltwater?\u003c\/h3\u003e\u003cp\u003eYes, the heater is suitable for both seawater and freshwater.\u003c\/p\u003e\u003ch3\u003eHow long is the cable?\u003c\/h3\u003e\u003cp\u003eThe cable measures 5.6 ft, which separates the heater in the tank from the controller and outlet.\u003c\/p\u003e\u003ch3\u003eWhat temperature range can I set?\u003c\/h3\u003e\u003cp\u003eThe controller allows a setting from 68 to 93 °F.\u003c\/p\u003e\u003ch3\u003eHow big is the heater itself?\u003c\/h3\u003e\u003cp\u003eThe unit measures 2 x 2 x 25 cm, or 0.8 x 0.8 x 9.8 inches.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44473834307647,"sku":null,"price":44.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-heater-100w.jpg?v=1794645652"},{"product_id":"hitop-aquarium-air-pump-10w-4-outlets","title":"HITOP 10W Aquarium Air Pump, 4 outlets, 320 GPH","description":"\u003cp\u003eThis aquarium air pump is rated at 320 GPH of total airflow, split across 4 outlets at 80 GPH each, and it draws 10W. Air pressure reaches up to 22 kPa, which covers a tank up to 7.2 ft (2.2 m) deep, so the pump suits setups where the airstones sit well below the unit. The kit also arrives with the tubing, air stones and valves needed to run four lines.\u003c\/p\u003e\u003ch2\u003e10W of power and 320 GPH of airflow\u003c\/h2\u003e\u003cp\u003eThe pump draws 10W and moves 320 GPH in total. Spread over the four outlets, that works out to 80 GPH per line, and the air volume can be turned with a knob on the pump body.\u003c\/p\u003e\u003cp\u003ePressure reaches 22 kPa at most, and that figure sets the depth limit. Deeper water than that is beyond the stated range.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e522 g (1.15 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e21.6 x 15.2 x 7.1 cm (8.5 x 6 x 2.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePump power\u003c\/th\u003e\n\u003ctd\u003e10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTotal airflow\u003c\/th\u003e\n\u003ctd\u003e320 GPH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOutlets\u003c\/th\u003e\n\u003ctd\u003e4, 80 GPH airflow per outlet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eAir pressure\u003c\/th\u003e\n\u003ctd\u003eUp to 22 kPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTank depth\u003c\/th\u003e\n\u003ctd\u003eUp to 7.2 ft (2.2 m)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eHousing, rubber feet and adjustable knob\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eThe body is made of ABS plastic, with metal air outlets and a sturdy motor inside.\u003c\/li\u003e\n\u003cli\u003eA filter pad sits at the bottom air inlet and filters impurities from the air.\u003c\/li\u003e\n\u003cli\u003eThe housing has two layers, and the pump stands on several rubber feet.\u003c\/li\u003e\n\u003cli\u003eThe knob on the pump sets the air volume for the four lines.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat comes in the box\u003c\/h2\u003e\u003cp\u003eThe kit supplies four lengths of soft tubing, each 4.9 ft long, plus four air stones and four check valves. You also get four regulating valves, four suction cups, two T-connectors and two air filter cotton pads.\u003c\/p\u003e\u003ch2\u003eDoes this air pump suit your setup?\u003c\/h2\u003e\u003cp\u003eCheck the water depth first: the pump is rated for tanks up to 7.2 ft (2.2 m) deep, and a deeper tank goes past the 22 kPa limit. Count the lines you need, since the four outlets give 80 GPH each and the whole unit moves 320 GPH.\u003c\/p\u003e\u003cp\u003eThe pump aerates several fish tanks at the same time, and it can drive a bubbler wall, a sponge filter, small ponds and hydroponics. It measures 21.6 x 15.2 x 7.1 cm and weighs 522 g, so allow room for that footprint wherever it sits.\u003c\/p\u003e\u003ch2\u003eQuestions about the HITOP air pump\u003c\/h2\u003e\u003ch3\u003eHow much air does each outlet put out?\u003c\/h3\u003e\u003cp\u003eEach of the four outlets delivers 80 GPH, for 320 GPH across the pump.\u003c\/p\u003e\u003ch3\u003eCan I turn the airflow down?\u003c\/h3\u003e\u003cp\u003eYes, a knob on the pump adjusts the air volume.\u003c\/p\u003e\u003ch3\u003eHow deep a tank will it handle?\u003c\/h3\u003e\u003cp\u003eThe pump reaches up to 22 kPa of pressure, which covers a tank up to 7.2 ft (2.2 m) deep.\u003c\/p\u003e\u003ch3\u003eDo I need to buy tubing separately?\u003c\/h3\u003e\u003cp\u003eNo, the kit includes 4 soft air tubes of 4.9 ft each, along with 4 air stones.\u003c\/p\u003e\u003ch3\u003eWhat are the check valves for?\u003c\/h3\u003e\u003cp\u003eThe box contains 4 check valves, one for each of the four air lines.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44474004799551,"sku":null,"price":52.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-air-pump.jpg?v=1794648220"},{"product_id":"hitop-classic-led-aquarium-light-12-16","title":"HITOP Classic Full Spectrum LED Aquarium Light, 12-16 in, with timer, extendable brackets","description":"\u003cp\u003eThis HITOP Classic aquarium light measures 12-16 in across the tank it is made for, so it suits small fish tanks in that length range. The LED fish tank light draws 10 W and gives about 1500 lumens from 33 LED beads. Brackets at each end extend roughly 2-3 in, and the light sits on tanks with walls up to 0.3 in thick.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eHITOP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eClassic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWattage\u003c\/th\u003e\n\u003ctd\u003e10W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLumens\u003c\/th\u003e\n\u003ctd\u003eabout 1500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLED count\u003c\/th\u003e\n\u003ctd\u003e33\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSuitable tank length\u003c\/th\u003e\n\u003ctd\u003e12-16 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eWhat does the full spectrum LED layout include?\u003c\/h2\u003e\u003cp\u003eThe light carries 33 LED beads split into four colours: 22 white, 4 red, 3 green and 4 blue. HITOP builds the fixture around a full spectrum design, and the bead mix is what that design consists of. The manufacturer lists the light for fresh water or plant tanks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e22 white beads make up the largest share of the 33.\u003c\/li\u003e\n\u003cli\u003eRed and blue beads number 4 each, with 3 green beads.\u003c\/li\u003e\n\u003cli\u003eThe timer offers 6H, 9H, 12H and 24H settings.\u003c\/li\u003e\n\u003cli\u003eA separate ON\/OFF button sits alongside the timer.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e10 W power draw and 1500 lumens\u003c\/h2\u003e\u003cp\u003eThe fixture is rated at 10 W, and HITOP gives its output as about 1500 lumens. Two controls run it: the timer with 6H, 9H, 12H and 24H settings, and an additional ON\/OFF button for switching the light directly.\u003c\/p\u003e\u003ch2\u003eFitting the light to your tank\u003c\/h2\u003e\u003cp\u003eMeasure the tank length before buying. A tank shorter than 12 in or longer than 16 in falls outside the stated range for this fixture. The brackets extend about 2-3 in at each end, and the tank wall must be no thicker than 0.3 in for the brackets to sit on it.\u003c\/p\u003e\u003cp\u003eThe light is not waterproof, so it belongs above the water rather than inside the tank. Keep it to fresh water or plant setups, as HITOP lists it.\u003c\/p\u003e\u003ch2\u003eQuestions buyers ask before ordering\u003c\/h2\u003e\u003ch3\u003eWhat tank length does this light fit?\u003c\/h3\u003e\u003cp\u003eIt fits tanks from 12 to 16 in long, and the brackets extend about 2-3 in at each end.\u003c\/p\u003e\u003ch3\u003eHow thick can the tank wall be?\u003c\/h3\u003e\u003cp\u003eThe wall thickness must be within 0.3 in for the brackets to fit.\u003c\/p\u003e\u003ch3\u003eHow many LEDs are on the fixture?\u003c\/h3\u003e\u003cp\u003eIt has 33 LED beads: 22 white, 4 red, 3 green and 4 blue.\u003c\/p\u003e\u003ch3\u003eWhat timer settings does it offer?\u003c\/h3\u003e\u003cp\u003eThe timer has 6H, 9H, 12H and 24H settings, and a separate ON\/OFF button switches the light.\u003c\/p\u003e\u003ch3\u003eCan the light go underwater?\u003c\/h3\u003e\u003cp\u003eNo, it is not waterproof and is made to sit above the tank on its brackets.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44474176995391,"sku":null,"price":33.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-light-12-16-in.jpg?v=1794651419"},{"product_id":"hitop-led-aquarium-light-timer-brackets","title":"HITOP Classic Full Spectrum LED Aquarium Light, 24-28 in, with timer, extendable brackets","description":"\u003cp\u003eFish tanks that measure 24 to 28 in in length take this aquarium light, and the brackets slide out about 2-3 in at each end so the fixture reaches across the rim. The fixture draws 20 W from 63 LED beads, puts out about 3000 lumens, and its timer holds a lighting time of 6H, 9H, 12H or 24H. Fresh water and plant setups are what the light is intended for.\u003c\/p\u003e\u003ch2\u003e63 WRGB beads and full spectrum light\u003c\/h2\u003e\u003cp\u003eInside the fixture sit 63 LED beads in total: 37 white, 10 red, 8 green and 8 blue. HITOP builds the light around a WRGB multi-colour full spectrum design, and the page describes the fixture as a full spectrum aquarium light.\u003c\/p\u003e\u003cp\u003eAlongside the timer sits a separate on\/off button, so switching the light does not change the lighting time you have set. Output is about 3000 lumens from 20 W.\u003c\/p\u003e\u003ch2\u003eTank size and bracket fit\u003c\/h2\u003e\u003cp\u003eCheck the tank length before buying: the light is made for tanks from 24 to 28 in.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe tank must be 24-28 in long, which is the range the fixture covers.\u003c\/li\u003e\n\u003cli\u003eGlass or wall thickness has to stay within 0.3 in.\u003c\/li\u003e\n\u003cli\u003eEach bracket arm measures 6 in before extension, and the arms slide out about 2-3 in per end.\u003c\/li\u003e\n\u003cli\u003eThe light is not waterproof, so it belongs above the water rather than in it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePower draw and timer settings\u003c\/h2\u003e\u003cp\u003eThe fixture draws 20 W. The timer offers four lighting periods, 6H, 9H, 12H and 24H, and the on\/off button works independently of that setting. Fresh water or plant tanks are what the fixture is intended for.\u003c\/p\u003e\u003ch2\u003eQuestions about this LED fish tank light with timer\u003c\/h2\u003e\u003ch3\u003eWhat tank length does it fit?\u003c\/h3\u003e\u003cp\u003eIt fits fish tanks measuring 24-28 in in length. The brackets extend about 2-3 in on each end to reach the rim.\u003c\/p\u003e\u003ch3\u003eHow much light does it put out?\u003c\/h3\u003e\u003cp\u003eThe fixture produces about 3000 lumens and draws 20 W. It holds 63 LED beads: 37 white, 10 red, 8 green and 8 blue.\u003c\/p\u003e\u003ch3\u003eWhat timer settings are available?\u003c\/h3\u003e\u003cp\u003eThe timer can be set to 6H, 9H, 12H or 24H of lighting time. An additional on\/off button switches the light separately.\u003c\/p\u003e\u003ch3\u003eHow thick can the tank wall be?\u003c\/h3\u003e\u003cp\u003eThe light suits tanks with a wall thickness within 0.3 in. Each bracket arm is 6 in long.\u003c\/p\u003e\u003ch3\u003eCan it go inside the tank?\u003c\/h3\u003e\u003cp\u003eNo, the light is not waterproof. It is listed for fresh water or plant tanks and fits tanks 24-28 in long.\u003c\/p\u003e\u003ch2\u003eFacts at a glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFits tank length: 24-28 in\u003c\/li\u003e\n\u003cli\u003ePower: 20 W\u003c\/li\u003e\n\u003cli\u003eOutput: about 3000 lumens\u003c\/li\u003e\n\u003cli\u003eLED beads: 63 total (37 white, 10 red, 8 green, 8 blue)\u003c\/li\u003e\n\u003cli\u003eDesign: WRGB multi-colour full spectrum\u003c\/li\u003e\n\u003cli\u003eTimer: 6H\/9H\/12H\/24H\u003c\/li\u003e\n\u003cli\u003eExtra control: additional on\/off button\u003c\/li\u003e\n\u003cli\u003eBracket length: 6 in on each end\u003c\/li\u003e\n\u003cli\u003eExtension: about 2-3 in on each end\u003c\/li\u003e\n\u003cli\u003eWall thickness: within 0.3 in\u003c\/li\u003e\n\u003cli\u003eWater resistance: not waterproof\u003c\/li\u003e\n\u003cli\u003eUse: fresh water or plant\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44474178830399,"sku":null,"price":47.21,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-light-24-28-in.jpg?v=1794651441"},{"product_id":"hitop-400w-ptc-aquarium-heater-controller","title":"HITOP 400W PTC Aquarium Heater with Controller, 400W, removable protective cover, for 55-100 gallon tanks","description":"\u003cp\u003eThis 400W PTC aquarium heater with external controller is sized for 55-100 gallon fish tanks and turtle tanks. The ceramic PTC heating element sits inside a removable protective cover, and the controller displays both the set temperature and the current water temperature. Five suction cups are included, and the power cord measures 5.6 ft.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eM6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eblack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget audience\u003c\/th\u003e\n\u003ctd\u003efish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e5.6 x 3 x 29 cm (2.2 x 1.2 x 11.4 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e454 g (1 lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded components\u003c\/th\u003e\n\u003ctd\u003e400W Aquarium PTC Heater, Powerful Suction Cup*5, Thermometer Sticker*1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific uses\u003c\/th\u003e\n\u003ctd\u003eHeat water in fish tank.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eThe box holds the heater, five suction cups and a thermometer sticker\u003c\/h2\u003e\u003cp\u003eThe pack contains the 400W aquarium PTC heater, five suction cups and one thermometer sticker. The heater itself measures 5.6 x 3 x 29 cm (2.2 x 1.2 x 11.4 in) and weighs 454 g (1 lb).\u003c\/p\u003e\u003ch2\u003eDoes the 400W heater suit your tank?\u003c\/h2\u003e\u003cp\u003eThe 400W output is intended for tanks between 55 and 100 gallons. It works in both seawater and freshwater, and the manufacturer lists fish tanks and turtle tanks as suitable. If your tank is smaller than 55 gallons or larger than 100 gallons, this heater is not sized for it.\u003c\/p\u003e\u003ch2\u003eSetting the temperature on the controller\u003c\/h2\u003e\u003cp\u003eSet the target temperature with the button on the external controller. The controller shows both the set temperature and the current water temperature, and the display can switch between °C and °F. The temperature setting range is 68-93 °F.\u003c\/p\u003e\u003ch2\u003eFeatures of the HITOP heater\u003c\/h2\u003e\u003cp\u003eThe heating element is made of ceramic PTC, where PTC stands for positive temperature coefficient. The element is anti-impact. A removable protective cover guards against impact and burns, and it can be taken off for cleaning. The 5.6 ft power cord connects the heater to the external controller. The suction cups let you mount the heater anywhere in the aquarium.\u003c\/p\u003e\u003ch2\u003eCleaning the heater and protective cover\u003c\/h2\u003e\u003cp\u003eThe protective cover is removable for cleaning. The heater is black, and the cover guards against impact and burns.\u003c\/p\u003e\u003ch2\u003eQuestions buyers ask about this aquarium heater\u003c\/h2\u003e\u003ch3\u003eHow many gallons does the 400W heater cover?\u003c\/h3\u003e\u003cp\u003eIt is sized for tanks from 55 to 100 gallons.\u003c\/p\u003e\u003ch3\u003eCan it be used in a saltwater tank?\u003c\/h3\u003e\u003cp\u003eYes, it works in seawater and freshwater.\u003c\/p\u003e\u003ch3\u003eWhat is included with the heater?\u003c\/h3\u003e\u003cp\u003eThe box contains the 400W aquarium PTC heater, five suction cups and one thermometer sticker.\u003c\/p\u003e\u003ch3\u003eWhat temperature range can I set?\u003c\/h3\u003e\u003cp\u003eThe controller allows settings from 68 to 93 °F.\u003c\/p\u003e\u003ch3\u003eHow long is the power cord?\u003c\/h3\u003e\u003cp\u003eThe power cord is 5.6 ft long.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44475806318655,"sku":null,"price":53.85,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-heater-400w.jpg?v=1794678597"},{"product_id":"hitop-100w-submersible-aquarium-heater-1bba","title":"HITOP Adjustable Aquarium Heater, 100W, submersible, with suction cups","description":"\u003cp\u003eThis 100W aquarium heater suits 12-30 gallon freshwater and saltwater tanks, and its body measures 8.8 inches long. The adjustable dial covers 68 to 93 °F, and a built-in thermostat switches the element on or off as the water temperature moves. The heater is made of 2 mm quartz glass and comes with a sticker thermometer plus three suction cups.\u003c\/p\u003e\u003ch2\u003eHeater build and temperature control\u003c\/h2\u003e\u003cp\u003eThe 2 mm quartz glass wall is 33% thicker than the 1.5 mm glass used on normal fish tank heaters, and the manufacturer describes it as more resistant to cracking and corrosion. A built-in thermostat holds the water at the temperature you set within a ±2 °F error.\u003c\/p\u003e\u003cp\u003eThe heater turns itself on or off as the water temperature changes, so the set point is maintained by the unit rather than by hand. Turning the dial sets any temperature between 68 and 93 °F.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eHP 608\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget audience\u003c\/th\u003e\n\u003ctd\u003efish\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e8.8in-100w\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e24.1 x 2.5 x 2.5 cm (9.5 x 1 x 1 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded components\u003c\/th\u003e\n\u003ctd\u003eSticker thermometer*1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific uses\u003c\/th\u003e\n\u003ctd\u003eHeat water to maintain the temperature of the fish tank\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003eMounting and running the heater\u003c\/h2\u003e\u003cp\u003eThe two suction cups let you install the heater at any angle on the tank wall. Keep the unit fully submerged whenever it is powered on, and unplug it before any water change. Choose the wattage from the size chart before you set the heater up.\u003c\/p\u003e\u003ch2\u003eWhat comes in the box\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne HITOP HP 608 100W aquarium heater\u003c\/li\u003e\n\u003cli\u003eTwo suction cups for mounting\u003c\/li\u003e\n\u003cli\u003eOne extra suction cup, for three in total\u003c\/li\u003e\n\u003cli\u003eOne sticker thermometer\u003c\/li\u003e\n\u003cli\u003eA 5 ft power cord on the heater\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDoes this heater suit your tank?\u003c\/h2\u003e\u003cp\u003eCheck the tank volume first: this 100W unit is rated for 12 to 30 gallon aquariums, in fresh or salt water. Measure the space where the heater will sit, because the body is 8.8 inches long and 1 inch across. The cord reaches 5 ft from the heater to the outlet, and the water level has to cover the whole body at all times while the unit runs.\u003c\/p\u003e\u003ch2\u003eQuestions about the HITOP 100W heater\u003c\/h2\u003e\u003ch3\u003eWhat tank size does the 100W heater cover?\u003c\/h3\u003e\u003cp\u003eIt is rated for 12 to 30 gallon freshwater and saltwater aquariums.\u003c\/p\u003e\u003ch3\u003eWhat temperature range can I set?\u003c\/h3\u003e\u003cp\u003eThe adjustable range runs from 68 to 93 °F, held by the built-in thermostat within ±2 °F.\u003c\/p\u003e\u003ch3\u003eHow long is the power cord?\u003c\/h3\u003e\u003cp\u003eThe cord measures 5 ft.\u003c\/p\u003e\u003ch3\u003eHow many suction cups are included?\u003c\/h3\u003e\u003cp\u003eYou get two suction cups for mounting plus one extra, three in total.\u003c\/p\u003e\u003ch3\u003eDoes the heater have to stay underwater?\u003c\/h3\u003e\u003cp\u003eYes, the heater must be fully submerged whenever it is powered on, and it should be unplugged before a water change.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44477436002367,"sku":null,"price":37.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-heater-100w-2.jpg?v=1794718286"},{"product_id":"hitop-mini-aquarium-heater-25w","title":"HITOP Submersible Mini Aquarium Heater, 25W, for 2-6 gallon tanks, external temperature controller","description":"\u003cp\u003eInside the box sit a mini aquarium heater with its power cable attached, a sticker thermometer, two suction cups and a bottom cover. The 25W model is rated for 2-6 gallon tanks, and the heater itself is 3.7 in long. It can be set from 64-93°F, and the temperature is adjusted on the external regulator rather than in the water.\u003c\/p\u003e\n\u003ch2\u003eThe heater's main features and what they do\u003c\/h2\u003e\n\u003cp\u003eThe external temperature regulator is separate from the heater, so you set the temperature without putting your hands in the tank. The range runs from 64-93°F. After a power failure, the power-off temperature memory function brings back the setting that was in use before.\u003c\/p\u003e\n\u003cp\u003eThe heater is made of thickened quartz glass, and the 1.5 m power cable gives some length between the tank and the outlet. The manufacturer describes the low power consumption as a way of helping prevent overheating.\u003c\/p\u003e\n\u003ch2\u003eWhat comes in the pack\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA mini heater with the power cable connected\u003c\/li\u003e\n\u003cli\u003eA sticker thermometer\u003c\/li\u003e\n\u003cli\u003eTwo suction cups for mounting the heater on the inner wall of the tank\u003c\/li\u003e\n\u003cli\u003eOne bottom cover, which protects the heater and keeps it from touching the tank bottom directly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eChecks to make before you buy\u003c\/h2\u003e\n\u003cp\u003eIn the same range, the 15W model covers 1-4 gallon fish tanks and the 35W model covers 4-10 gallon nano tanks, betta tanks, fish bowls and desktop aquariums.\u003c\/p\u003e\n\u003cp\u003eThe manufacturer lists fresh water and saltwater tanks, betta tanks and turtle tanks as suitable. Check that the heater's length of 3.7 in fits the space on the inner wall where you plan to attach it with the suction cups, and that the 1.5 m cable reaches your outlet.\u003c\/p\u003e\n\u003ch2\u003eWhich details should I confirm before ordering?\u003c\/h2\u003e\n\u003ch3\u003eWhat size tank does the 25W heater take?\u003c\/h3\u003e\n\u003cp\u003eThe 25W model is rated for 2-6 gallon tanks. The 15W model covers 1-4 gallons and the 35W model covers 4-10 gallons.\u003c\/p\u003e\n\u003ch3\u003eHow long is the heater and how does it go into the tank?\u003c\/h3\u003e\n\u003cp\u003eThe heater measures 3.7 in long. Two suction cups attach it to the inner wall of the tank, and a bottom cover keeps it from touching the tank bottom directly.\u003c\/p\u003e\n\u003ch3\u003eHow do I change the temperature?\u003c\/h3\u003e\n\u003cp\u003eThe temperature is set on the external regulator, which lets you adjust it without wet hands. The setting range is 64-93°F.\u003c\/p\u003e\n\u003ch3\u003eCan it go in a saltwater tank?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer lists fresh water and saltwater tanks, betta tanks and turtle tanks as suitable for this heater.\u003c\/p\u003e\n\u003ch3\u003eWhat happens to the setting after a power cut?\u003c\/h3\u003e\n\u003cp\u003eThe power-off temperature memory function restores the temperature setting that was in use before the power failure.\u003c\/p\u003e\n\u003ch3\u003eWhat is in the box?\u003c\/h3\u003e\n\u003cp\u003eThe pack holds the mini heater with its connected power cable, a sticker thermometer, two suction cups and one bottom cover.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eQ1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003e25W(2-6Gal)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eTarget audience\u003c\/th\u003e\n\u003ctd\u003eAquarium Heater\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e25W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e1.2 x 1.2 x 9.4 cm (0.5 x 0.5 x 3.7 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem weight\u003c\/th\u003e\n\u003ctd\u003e136 g (4.8 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded components\u003c\/th\u003e\n\u003ctd\u003eaquarium heater and suction cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecific uses\u003c\/th\u003e\n\u003ctd\u003eHeat water to the set temperature in the fish tank.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44478003970111,"sku":null,"price":35.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-heater-25w.jpg?v=1794731369"},{"product_id":"hitop-dual-outlet-aquarium-air-pump","title":"HITOP Dual Outlet Aquarium Air Pump, whisper adjustable, 10 to 100 gallon","description":"\u003cp\u003eThis two-outlet aquarium air pump from HITOP is rated for fish tanks between 10 and 100 gallon. The 3W pump has a body made of ABS thickening engineering plastics in a grey-white colour. Air volume is set by hand, and the unit includes two air stones, two 4.9 ft air tubes and a T-connector for splitting the flow.\u003c\/p\u003e\u003ch2\u003eTwo outlets and a body in ABS plastic\u003c\/h2\u003e\u003cp\u003eThe pump has 2 outlets, and each one feeds a separate line of air. Its housing is made of ABS thickening engineering plastics, coloured grey-white; the unit weighs 400 g (14.1 oz) and measures 13 x 5.7 x 7 cm (5.1 x 2.2 x 2.8 in). Soft rubber foot pads help reduce noise while it runs, and manual adjustment of the air volume does not cause shakes or electric field fluctuation.\u003c\/p\u003e\u003cp\u003eThe air intake cotton filters impurities in the air and is replaceable, and one extra replacement cotton is supplied in the box.\u003c\/p\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003e2 outlets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eColour\u003c\/th\u003e\n\u003ctd\u003eGrey-White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eStyle\u003c\/th\u003e\n\u003ctd\u003e3W-80GPH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003ePlastic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem weight\u003c\/th\u003e\n\u003ctd\u003e400 g (14.1 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eItem dimensions (L x W x H)\u003c\/th\u003e\n\u003ctd\u003e13 x 5.7 x 7 cm (5.1 x 2.2 x 2.8 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch2\u003e3W power and hand-set air volume\u003c\/h2\u003e\u003cp\u003eThe pump draws 3W and is listed in the 3W-80GPH style. Air volume is adjusted manually on the unit: turning the control changes the output, and according to the manufacturer this manual adjustment does not produce shakes or electric field fluctuation.\u003c\/p\u003e\u003ch2\u003eWhat the box contains\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo air stones for diffusing air into the water\u003c\/li\u003e\n\u003cli\u003eTwo air tubes, each 4.9 ft long\u003c\/li\u003e\n\u003cli\u003eTwo return valves\u003c\/li\u003e\n\u003cli\u003eTwo air regulating valves\u003c\/li\u003e\n\u003cli\u003eOne T-connector\u003c\/li\u003e\n\u003cli\u003eTwo suction cups\u003c\/li\u003e\n\u003cli\u003eOne air intake cotton, plus one extra replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDoes it suit my tank and setup?\u003c\/h2\u003e\u003cp\u003eThe pump fits fish tanks from 10 to 100 gallon, so check your tank's volume against that range before buying. With two outlets, you can run two lines of air, and the included T-connector lets a single line be split. The two air tubes are each 4.9 ft long, so measure the distance from the pump to where the air stones will sit.\u003c\/p\u003e\u003ch2\u003eWhich details should I confirm before ordering?\u003c\/h2\u003e\u003ch3\u003eHow many outlets does the pump have?\u003c\/h3\u003e\u003cp\u003eIt has 2 outlets, which allows two separate air lines to be connected.\u003c\/p\u003e\u003ch3\u003eWhat size tank is the pump rated for?\u003c\/h3\u003e\u003cp\u003eThe pump fits fish tanks from 10 to 100 gallon.\u003c\/p\u003e\u003ch3\u003eWhat accessories come with the pump?\u003c\/h3\u003e\u003cp\u003eThe box includes two air stones, two 4.9 ft air tubes, two return valves, two air regulating valves, one T-connector, two suction cups, and one air intake cotton plus a spare.\u003c\/p\u003e\u003ch3\u003eCan the air volume be adjusted by hand?\u003c\/h3\u003e\u003cp\u003eYes, the air volume is manually adjustable, and the manufacturer states that this adjustment does not cause shakes or electric field fluctuation.\u003c\/p\u003e\u003ch3\u003eIs the air intake cotton replaceable?\u003c\/h3\u003e\u003cp\u003eThe air intake cotton can be replaced, and one extra replacement is included.\u003c\/p\u003e","brand":"HITOP","offers":[{"title":"Default Title","offer_id":44478004002879,"sku":null,"price":37.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/2409\/1199\/files\/hitop-aquarium-air-pump-2.jpg?v=1794731378"}],"url":"https:\/\/dogjointly.com\/collections\/brand-hitop.oembed","provider":"DogJointly","version":"1.0","type":"link"}